Name: Mp87800
Availability: InStock

Mp87800 features
• 4-wire rail- / wallmount transmitter
• Microprocessor-based
• RTD, T/C, mV and Ohm input
• Fully linearized
• High accuracy (typical 0.1%)
• Choice of current & voltage outputs
• Optional built-in display
• 5 Year warranty

SENSOR RANGES

Sensor type	Temp. Min. °C	Temp. Max. °C	Span Min. °C
K (NiCr-Ni)	-270	1370	50
J (Fe-CuNi)	-200	1200	50
L (DIN Fe-CuNi)	-200	900	50
T (Cu-CuNi)	-270	400	50
U (DIN Cu-CuNi)	-200	600	50
E (NiCr-CuNi)	-270	1000	50
S (Pt10%Rh-Pt)	-60	1760	250
R (Pt13%Rh-Pt)	-60	1760	250
B (Pt30%Rh-Pt6%Rh)	0	1820	600
Pt100 IEC751	-200	850	25
Pt250 IEC751	-200	850	25
Pt500 IEC751	-200	850	25
Pt1000 IEC751	-200	850	25
Ni100 IEC751	-60	250	25
Ni500 IEC751	-60	250	25
Ni1000 IEC751	-60	250	25
Cu10	-200	250	25
Cu100	-200	250	25
C (W5%Re-W26%Re)	0	2300	150
D (W3%Re-W25%Re)	0	2300	150
N (NiCrSi-NiSiMg)	-270	1300	50
mV	0	1000	10
Ohm	0	9999	100

Available power supplies

Order Suffix	Power Supply
V1	230 VAC ±10%
V2	115 VAC ±10%
V3	24 VDC Isolated
V4	24 VAC
V5	12 VDC Isolated
V6	12 VAC

Order information:

Model
Mp87800

Options
V / IF / D

Options Explained
- IF = Interface and Software
- V = power; select V1-V6 from table below
- D = Built-in readout

General
Cold junction drift	± 0.01°C/°C
Input RTD	Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100
Input T/C	K,J,L,T,U,E,R,S,B,C,D,N
Linearization	On / Off
Supply Effect	0.001 %/V
Supply	10...40 VDC, Polarity Protected
Output	4...20 mA, 0...20 mA, 0...1 V and 0...10 V
Excitation Current, RTD	0.1 mA
Sensor Lead Resistance, RTD	500 Ohm max.
Sensor Lead Resistance Effect	0.001°C/Ohm
Zero drift	± 0.01%/°C or ±0.02°C/°C
Sensor Lead Resistance, T/C	10 kOhm max.
Span drift	± 0.005%/°C or ±0.01°C/°C
Ambient Operating Temp.	-10 to 70°C (-4° to 160°F)
Open Circuit Detection	Upscale / Downscale
Ingress Protection	IP30
Startup Time	20 sec.
Storage Temperature	-20 to 100°C (-4° to 210°F)
Warmup Time	5 min.
Housing Material	Makrolon
Housing Dimension W x H x D	55 x 75 x 110 mm (2.16” x 2.9” x 4.3”)

In order to read & print pdf files
you will need Adobe Acrobat® Reader.

The PC software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port. You will need to unpack the .zip file first. Please read the readme.1st file included in zip file for installation instructions.

Mp87800

Power Supply

DOWNLOADS

S-products

Service and support

Site information