Mp82710 (ATEX)
Mp82710 (ATEX) features
• 2-wire headmount transmitter
• Microprocessor-based
• RTD, T/C, mV and Ohm input
• Fully isolated
• Fully linearized
• RFI/EMI-Protected
• Short startup time
• High Accuracy (typical 0.1%)
• Optional Plug-In Readout & Head
• 5-Year Warranty
• ATEX approval available
Order Information
Example:
Model Mp82710 –D-CW-IF-EX
Options:
-D = Plug-in Loop-powered Readout
-CW = DAN type connection head with window
-IF = Interface and software
-EX = Intrinsically Safe Approval
ATEX Ex II 1 G Ex ia IIC T4...T6 Ga
General | |
Cold junction drift | ± 0.03°C/°C |
Input Ohm | Ohm, mV |
Input RTD | Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100 |
Input T/C | K,J,L,T,U,E,R,S,B,C,D,N |
Isolation | 500 VDC / 1500 VAC |
Linearization | On / Off |
Minimum Span | 25°C (45°F) |
Supply Effect | 0.003%/V |
Other inputs | Ohm, mV |
Supply | 5..40 VDC, Polarity Protected |
Long Term Drift | ± 0.05%/Year |
Output | 4..20 mA or 20..4 mA |
Excitation Current, RTD | 0.1 mA |
Load capability | Vbat-5V / 20 mA |
Sensor Lead Resistance, RTD | 500 Ohm max. |
Zero drift | ± 0.01%/°C or ±0.02°C/°C |
Sensor Lead Resistance, T/C | 10,000 Ohm max. |
Span drift | ± 0.01%/°C or ±0.02°C/°C |
Ambient Operating Temp. | -40...+ 85°C. |
Open Circuit Detection | Upscale / Downscale |
Ingress Protection | IP30 |
Startup Time | 5 sec. |
Storage Temperature | -40...+100°C. |
Warmup Time | 2 Min. |
Housing Material | Zinc Alloy (ZAMAK 5) epoxy coated |
Housing Dimensions | 43mm Dia. x 27mm H. (1.70” x 0.99”) |
Housing Dimensions with Read-Out | 47mm Dia. x 36mm H. (1.85” x 1.42”) |
In order to read & print pdf files
you will need Adobe Acrobat® Reader.
The PC software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port. You will need to unpack the .zip file first. Please read the readme.1st file included in zip file for installation instructions.
you will need Adobe Acrobat® Reader.
The PC software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port. You will need to unpack the .zip file first. Please read the readme.1st file included in zip file for installation instructions.
DOWNLOADS
- USB interface software v53 (4.6MB)
- Instruction manual 2-wire MP series (2.88MB)
- MP82710 Specification Sheet (177.03KB)