MP82710 (ATEX) PRODUCT OVERVIEW

 



 

Mp82710 (ATEX) features
• 2-wire headmount transmitter
• Microprocessor-based
• RTD, T/C, mV and Ohm input
• Fully isolated
• Fully linearized
• RFI/EMI-Protected
• Short startup time
• High Accuracy (typical 0.1%)
• Optional Plug-In Readout & Head
• 5-Year Warranty
• ATEX approval available



  SPECIFICATIONS
 




Input RTD 

Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100

Input T/C 

K,J,L,T,U,E,R,S,B,C,D,N

Other inputs

Ohm, mV

Minimum Span 

See table below

Output 

4…20 mA or 20...4 mA

Linearization 

On / Off

Supply 

5...40 VDC, Polarity Protected

Supply Effect 

0.003%/V

Zero Drift 

± 0.01%/°C or ±0.02°C/°C

Span Drift 

± 0.01%/°C or ±0.02°C/°C

Long Term Drift 

± 0.05%/Year

Cold Junction Drift 

± 0.03°C/°C

Excitation Current, RTD 

0.1 mA

Sensor Lead Resistance, RTD 

500 Ohm max.

Sensor Lead Resistance Effect

0.005°C/Ohm

Sensor Lead Resistance, T/C 

10,000 Ohm max.

Open Circuit Detection 

Upscale / Downscale

Load Capability 

Vbat-5V / 20 mA

Startup Time 

5 sec.

Warmup Time 

2 Min.

Isolation

500 VDC / 1500 VAC

Ambient Operating Temp. 

-40...+ 85°C

Ingress Protection

IP30

Storage Temperature 

-40...+100°C

Housing Material 

Zinc Alloy (ZAMAK 5) epoxy coated

Housing Dimension 

43mm Dia. x 27mm H. (1.70” x 0.99”)

Housing Dimension with Read-Out 

47mm Dia. x 36mm H. (1.85” x 1.42”)


SENSOR RANGES

Sensor type  

Temp. Min. °C  

Temp. Max. °C  

Span Min. °C  

K (NiCr-Ni) 

-270

1370

50

J (Fe-CuNi) 

-200

1200

50

L (DIN Fe-CuNi) 

-200

900

50

T (Cu-CuNi) 

-270

400

50

U (DIN Cu-CuNi) 

-200

600

50

E (NiCr-CuNi) 

-270

1000

50

S (Pt10%Rh-Pt) 

-60

1760

250

R (Pt13%Rh-Pt) 

-60

1760

250

B (Pt30%Rh-Pt6%Rh) 

0

1820

600

Pt100 IEC751 

-200

850

25

Pt250 IEC751

-200

850

25

Pt500 IEC751 

-200

850

25

Pt1000 IEC751 

-200

850

25

Ni100 IEC751 

-60

250

25

Ni500 IEC751 

-60

250

25

Ni1000 IEC751 

-60

250

25

Cu10 

-200

250

25

Cu100 

-200

250

25

C (W5%Re-W26%Re) 

0

2300

150

D (W3%Re-W25%Re) 

0

2300

150

N (NiCrSi-NiSiMg) 

-270

1300

50

mV 

0

1000

10

Ohm 

0

9999

100


Download a printable specifications sheet here.


  ORDER INFORMATION
 


Example:
Model Mp82710 –D-CW-IF-EX

Options:
-D = Plug-in Loop-powered Readout
-CW = DAN type connection head with window
-IF = Interface and software
-EX = Intrinsically Safe Approval
ATEX Ex II 1 G Ex ia IIC T4...T6 Ga




  MANUAL
 


Mp82700(-H), Mp82710, Mp82800(-R), Mp82810(-R), Mp88700(-H),
Mp88710, Mp88800(-R) and Mp88810(-R)
- October 2008 (300kb)



  SOFTWARE

 



  USB interface software V4.4  Sept 2013
 

This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port.

SPRO_MpUser_V44 (USB).zip

Please read the readme.1st file included in zip file for installation instructions.


 

(c) 2007- S-Products | home | contact us | privacy policy| disclaimer