MP82710-H (ATEX) PRODUCT OVERVIEW

 




Mp82710-H (ATEX) features
• Microprocessor based
• RTD, T/C, mV and Ohm input
• Fully linearized & infallibly galvanically isolated
• RFI / EMI protected
• High accuracy (Typical 0.1%)
• Hart® communication
• Optional plug-in readout & head
• ATEX approval available
• 5 Year warranty



  SPECIFICATIONS
 


Input RTD

Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100 

Input T/C

K,J,L,T,U,E,R,S,B,C,D,N

Input V

 

Input Ohm

Ohm, mV

Minimum Span

See table below

Output

4..20 mA or 20..4 mA and Hart® protocol

Linearization

On / Off

Supply

10..40 VDC, Polarity Protected

Supply Effect

0.001%/V

Zero Drift

± 0.01%/°C or ±0.02°C/°C

Span Drift

± 0.005%/°C or ±0.01°C/°C

Long Term Drift

± 0.05%/Year

Cold Junction Drift

± 0.01°C/°C

Excitation Current, RTD

0.1 mA

Sensor Lead Resistance, RTD

500 Ohm max.

Sensor Lead Resistance Effect 

0.001°C/Ohm

Sensor Lead Resistance, T/C

10,000 Ohm max.

Open Circuit Detection

Upscale / Downscale

Load Capability

Vbat-10V / 20 mA

Startup Time

± 10 sec.

Warmup Time

± 5 Min.

Isolation

500 VDC / 1500 VAC

Ambient Operating Temp.

-40...+ 85°C.

Ingress Protection IP30

Storage Temperature

-40...+100°C.

Housing Material

Zinc Alloy (ZAMAK 5) epoxy coated

Housing Dimension

43mm Dia. x 27mm H. (1.70" x 0.99")

Housing Dimension with Read-Out

47mm Dia. x 36mm H. (1.85" x 1.42")

SENSOR RANGES


Sensor type

Temp. Min.
°C

Temp. Max.
°C

Span Min.
°C

K (NiCr-Ni)

-270

1370

50

J (Fe-CuNi)

-200

1200

50

L (DIN Fe-CuNi)

-200

900

50

T (Cu-CuNi)

-270

400

50

U (DIN Cu-CuNi)

-200

600

50

E (NiCr-CuNi)

-270

1000

50

S (Pt10%Rh-Pt)

-60

1760

250

R (Pt13%Rh-Pt)

-60

1760

250

B (Pt30%Rh-Pt6%Rh)

0

1820

600

Pt100 IEC751

-200

850

25

Pt250 IEC751

-200

850

25

Pt500 IEC751

-200

850

25

Pt1000 IEC751

-200

850

25

Ni100 IEC751

-60

250

25

Ni500 IEC751

-60

250

25

Ni1000 IEC751

-60

250

25

Cu10

-200

250

25

Cu100

-200

250

25

C (W5%Re-W26%Re)

0

2300

150

D (W3%Re-W25%Re)

0

2300

150

N (NiCrSi-NiSiMg)

-270

1300

50

mV

0

1000

10

Ohm

0

9999

100


Download a printable specifications sheet here.


  ORDER INFORMATION
 

Example:
Model Mp82710H –D-CW-IF-EX

Options:
-D = Plug-in Loop-powered Readout
-CW = DAN type connection head with window
-IF = Interface and software
-EX = Intrinsically Safe Approval
ATEX Ex II 1 G Ex ia IIC T4...T6 Ga

 




  MANUAL
 


Mp82700(-H), Mp82800(-R), Mp88700(-H),
Mp88800(-R) and Mp82850-R
- 2013 (3mb)



  SOFTWARE

 



  USB interface software V4.4  Sept 2013
 

This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port.

MpUser_Setup_v50.zip

Please read the readme.1st file included in zip file for installation instructions.


 

(c) 2007- S-Products | home | contact us | privacy policy| disclaimer